Page 12 - D-200+ User Guide

Scan Features

Scan List
You can create a list of the channels in the radio to be “scanned” in various
ways. A programmable button must be set up to turn the feature on and off.
When the radio receives a call while in the scan mode, it can automatically
switch to transmit on the received channel if you respond to the call quickly.
Each channel can have it’s own scan list.
Starting and Stopping Scan
You can select a pre-programmed button to start the scanning or select a
scan channel manually. Once scanning begins, you will hear a confirming
tone and then the LED will begin to blink RED .

Stop the scanning by pressing the assigned button or by changing the
channel.
Priority Scan
The scan will listen to the Priority Channel in between each of the other
channels in the list.
Answering a call during Scan
When the scanning “stops” on an incoming call, the user can return the call
automatically without having to change the selector knob to the received
channel.

The user must return the call within a pre-set time limit, or scanning will
resume. The pre-set time limit is called the “Signal Hold Time” and is set by
the system administrator.
If your system has the “Open Channel” feature activated, you must wait
until you hear the short tone before transmitting.