Page 4 - D-200+ User Guide

Preparation

Battery Use and Care
The battery is not completely charged at the factory, so please charge it
before using. After purchase, or extended storage (more than two months),
the battery cannot reach its normal operating capacity. By repeating the
charge/discharge two or three times, the operating capacity will increase to
its normal capacity.

Safety Note: After fully charging, please remove radio and battery from the
charger to avoid damage or overcharging.
Charging the battery
1) The temperature for charging should be between 41F (5℃) and 104F
(40℃). The battery cannot be fully charged if out of this range.
2) Please clean the battery terminal when it is dusty or dirty.
3) Please turn off the radio power before charging.
4) Insert radio or battery in the charger. The charger’s LED will:
A. Light RED while charging
B. Light GREEN when the battery is fully charged
C. Blink RED if the battery is over-discharged and needs slow
charging. It should turn to solid Red in a few minutes. If the
flashing continues more than 1 hour, replace the battery
5) Please replace with a new battery if it cannot recover normal capacity
after fully charging.

INSTALLING THE BATTERY REMOVING THE BATTERY